Bryant Furnace Guide: Prices, Cost, Models, Reviews, Warranty, Efficiency Ratings, and Filter Recommendations
November 22, 2026

Bryant's three furnace series differ more in comfort than in efficiency. The Legacy 916S and the Preferred 927T both reach up to 97% AFUE, so stepping up a series mainly buys a quieter, steadier blower. Only the Evolution 987M climbs higher, to 98.5% AFUE.
Compare the three lines below, then take the quick quiz to match the right filter to your Bryant furnace.
Bryant Furnace Series At A Glance
Higher series add comfort first. Efficiency stays close until the top model.
Filter fit for Bryant media cabinets: 16x25x5, 20x25x5, or 24x25x5. Read your size on the old filter frame.
Installed ranges from HomeGuide. AFUE maximums from Bryant.com and vary by size. Dealers set final prices.
Find Your Furnace Filter Match
Answer a few quick questions and we'll match you to the right filter for your furnace.
A Bryant furnace is a residential heating system made by Bryant Heating & Cooling Systems, a Carrier Global brand sold through independent Bryant dealers. For this guide, Filterbuy reviewed all 21 Bryant gas furnace listings and their warranty terms. We also make compatible replacement filters for Bryant media cabinets.
TL;DR
Bryant sells 21 gas furnaces across three series in 2026: Evolution (premium, up to 98.5% AFUE, the share of fuel turned into heat), Preferred (mid-range, variable-speed blowers), and Legacy (entry-level). Installed prices run from about $2,300 to $8,000 or more. Bryant media filter cabinets take 16x25x5, 20x25x5, or 24x25x5 filters.
Key Takeaways
High-efficiency Bryant models cost about $1,000 to $2,500 more, and that premium pays back fastest in cold climates.
The Legacy 916S reaches up to 97% AFUE, the same ceiling as the pricier Preferred 927T and Evolution 987T.
Bryant's parts limited warranty lasts 10 years with registration within 90 days and 5 years without.
Filterbuy's review found Bryant's 880TA page lists two heat exchanger terms, so get the warranty certificate in writing.
Bryant media cabinets with part numbers ending in 0016, 0020, or 0024 take nominal 16x25x5, 20x25x5, or 24x25x5 filters.
How Much Does A Bryant Furnace Cost?
A Bryant gas furnace typically costs $4,000 to $8,000 installed for a 2,000-square-foot home, based on Bryant's published pricing guide. HomeGuide's installed ranges by series, shown below, run lower. Dealers set final prices.
When Filterbuy compared the two sources, the gap came down to scope. Per-series ranges assume a like-for-like swap, while Bryant's estimate covers a fuller replacement. A switch from an 80% furnace to a 90%+ condensing furnace almost always adds PVC venting and a condensate drain, since condensing models pull extra heat from exhaust and drain off the water. Ask each dealer to price venting and drain work as separate line items. Our furnace replacement price guide breaks down the rest.
Bryant Furnace Prices By Series
Installed ranges from HomeGuide's Bryant furnace cost guide. AFUE from Bryant.com, reviewed November 2026.
Which Bryant Gas Furnace Models Are Available In 2026?
Bryant lists 21 gas furnaces across three series in November 2026. Condensing models are rated 92.1% to 98.5% AFUE, and non-condensing models are rated 80% AFUE. The Evolution 98 (987M) is the most efficient.
Bryant Gas Furnace Models Compared
Source: Bryant.com, reviewed November 2026. Variable, fixed, and multi-speed refer to the blower. AFUE values are maximums and vary by size.
What Do Bryant Model Numbers Tell You?
Filterbuy built this decoder from Bryant's 21 listed furnaces. Confirm details on your rating plate.
First digit: 9 marks a condensing furnace rated 92% AFUE or higher, and 8 marks an 80% AFUE non-condensing furnace.
Second digit: 8 marks Evolution, 2 marks Preferred, 1 or 0 marks Legacy, and 3 marks an ultra-low-NOx (lower-emission) model.
Letter after the digits: M means modulating, T means two-stage, and S means single-stage.
Which Bryant Series Fits Your Home?
Filterbuy's spec comparison shows a higher series buys comfort more than efficiency.
Cold climate: Choose a 97%+ model (987M, 987T, 927T, 926S, or 916S). Only these can meet ENERGY STAR's 97% northern threshold.
Efficiency on a budget: The Legacy 916S reaches up to 97% AFUE, the same ceiling as the Preferred 927T and Evolution 987T.
Noisy or uneven rooms: Variable-speed blowers start at Preferred, and the Evolution 987M adds modulating heat that adjusts output in small steps.
No room for PVC venting: An 80% model (880TA, 820T, or 800S) uses conventional venting but faces the 2028 standard.
How Efficient Are Bryant Furnaces?
Bryant gas furnaces range from 80% to 98.5% AFUE, the share of fuel turned into usable heat over a year. A 98.5% AFUE Evolution 98 turns about 98.5 cents of every fuel dollar into heat, while an 80% Legacy furnace turns about 80 cents into heat.
Our gas furnace guide covers BTU sizing.
Is The 2028 Furnace Efficiency Rule Still On?
Yes, for now. The U.S. Department of Energy's final rule on consumer furnace standards requires indoor (non-weatherized) gas furnaces manufactured on or after December 18, 2028 to reach 95% AFUE. A June 2026 Supreme Court order reopened a legal challenge, and DOE is weighing a delay to January 1, 2030. Installed 80% furnaces can still be repaired.
What Does The Bryant Furnace Warranty Cover?
Bryant gas furnaces carry a 10-year parts limited warranty when the original owner registers within 90 days of installation. Without registration, parts coverage drops to 5 years. Labor isn't included. Bryant notes labor bills can run $100 to $1,000 or more.
Red Shield: The Evolution 987M, 986T, and 880TA get a one-time replacement with a comparable unit if the heat exchanger fails from a defect, for 10 years with timely registration or 5 years without.
Heat exchanger: Condensing models such as the 987M and 926T carry a lifetime limited warranty for registered original owners, or 20 years without registration. The Legacy 912S carries 20 years.
Second owners: Later owners receive 5-year parts coverage and no Red Shield.
One finding from Filterbuy's review: the 880TA product page lists both a lifetime and a 20-year heat exchanger term. Ask your dealer for the warranty certificate before you sign.
Bryant Furnace Reviews: Strengths And Trade-Offs
Consumer Reports placed Bryant in its very good reliability group for gas furnaces in 2026, as summarized in Filterbuy's ranking of the best furnace brands. Independent dealers install Bryant furnaces, so check each dealer's reviews and labor warranty before you sign.
Strengths:
Bryant and Carrier furnaces share a parent company and core designs, as our Carrier furnace guide shows.
Variable-speed blowers start at the mid-priced Preferred tier.
Trade-offs:
Bryant posts no prices, so you must compare dealer quotes.
Only the 987M, 986T, and 880TA carry Red Shield unit replacement.
Which Air Filter Does A Bryant Furnace Use?
A Bryant gas furnace takes either a 1-inch or 2-inch filter at the return, or a nominal 16x25x5, 20x25x5, or 24x25x5 media filter in a Bryant or Carrier cabinet. Finding yours is quick. Read the size printed on your old filter frame, and if there's no filter, measure the slot.
Filterbuy makes compatible filters in all three cabinet sizes, cut, pleated, and framed to order in our own US plants. The nominal size is the ordering name. The actual cut is smaller by design so it fits. Our 16x25x5 air filters measure 15.75 x 24.75 x 4.38 inches, our 20x25x5 19.88 x 24.75 x 4.38, and our 24x25x5 23.63 x 24.69 x 4.25. Size not listed? We cut custom air filters to the eighth of an inch. Filterbuy isn't affiliated with or endorsed by Bryant or Carrier.
MERV is a 1 to 16 rating of how well a filter captures airborne particles. MERV 8 is the standard choice for most homes, MERV 11 suits allergy sufferers and homes with pets, and MERV 13 air filters are the pick for smoke. As with size, check your furnace manual to confirm the MERV ratings it's built for. Our guide to MERV 8 vs MERV 11 vs MERV 13 and EPA guidance on MERV ratings compare the tiers. See how often to change a 4-inch or 5-inch furnace filter.
Supporting Statistics
60% of U.S. homes heat mainly with a central furnace.
74.4 million of 123.5 million homes use one.
53.3 million of those furnaces burn natural gas.
For Bryant buyers: Bryant competes in the most common heating category.
Source: Space Heating in U.S. Homes, by Housing Unit Type, 2020
ENERGY STAR gas furnaces cut yearly energy costs.
North: up to 18% more efficient than baseline models, saving about $160 a year.
South: up to 16% more efficient than standard models, saving about $60 a year.
For Bryant buyers: Every size of the 987M earns the label.
Source: ENERGY STAR Furnaces
Non-condensing furnaces hold about 55% of the U.S. gas furnace market.
Figure reported in the petition to delay the 95% AFUE rule.
For Bryant buyers: Bryant's 80% AFUE models fall in this group.
Source: Contractor Input Requested: Department of Energy Weighs Delaying Furnace Rule
Frequently Asked Questions About Bryant Furnaces
Are Bryant Furnaces Good?
Yes. Consumer Reports placed Bryant in its very good reliability group for gas furnaces in 2026, and Bryant's efficiency tops out at 98.5% AFUE.
How Long Does A Bryant Furnace Last?
A well-maintained Bryant gas furnace can last 15 to 25 years, the range InterNACHI's estimated life expectancy chart gives for furnaces. Our guide on when to replace a furnace covers the warning signs.
Can I Buy A Bryant Furnace Online?
No. Bryant sells furnaces through independent Bryant dealers, who install the furnace and register the warranty. Installation requires a licensed professional and usually a permit, as our furnace installation cost guide explains. Install carbon monoxide alarms on every level of the home.
Is A High-Efficiency Bryant Furnace Worth It?
Mostly in colder climates. Bryant prices high-efficiency models about $1,000 to $2,500 above standard models, and ENERGY STAR estimates certified gas furnaces save about $160 a year in the North and $60 in the South. By Filterbuy's math, that premium pays back in roughly 6 to 16 years up north and 17 to 42 years down south, before rebates.
Is There A Federal Tax Credit For A Bryant Furnace In 2026?
No. The federal Energy Efficient Home Improvement Credit (Section 25C) covered improvements made through December 31, 2025, so a Bryant furnace installed in 2026 doesn't qualify. Ask your gas utility about local rebates, and see our guide to the best time to buy a furnace.
Find The Right Filter For Your Bryant Furnace
Check the size on your Bryant media cabinet label or old filter frame, then shop Filterbuy's Bryant-compatible air filters in MERV 8, MERV 11, and MERV 13. You'll get fast and free 2-day delivery to most US states, or you can save with an air filter subscription.
Glossary
AFUE (Annual Fuel Utilization Efficiency): The share of fuel a furnace turns into usable heat over a year.
Bryant Heating & Cooling Systems: A Carrier Global HVAC brand sold through independent dealers.
Carrier Global: Bryant's U.S. parent company, which also owns the Carrier brand.
Condensing Furnace: A 90%+ AFUE gas furnace that recovers heat from exhaust gases.
Modulating Gas Valve: A burner control that adjusts heat output in small steps to match demand.
Two-Stage Furnace: A furnace with low and high heat settings.
Variable-Speed Blower: A blower that adjusts airflow for steadier, quieter heat.
Low-NOx Burner: A burner built to cut nitrogen oxide emissions.
Red Shield Warranty: Bryant's unit replacement limited warranty on select Evolution furnaces.
Media Filter Cabinet: A housing beside the furnace that holds a deep pleated filter.
ENERGY STAR: An EPA efficiency certification program.
MERV (Minimum Efficiency Reporting Value): A 1 to 16 rating of an air filter's ability to capture airborne particles.