Shop by
Yes, for spores in the air. A properly sized true-HEPA purifier reduces airborne mold spores and fragments as room air passes through the filter. It does not remove mold growing on damp surfaces. You still need to fix moisture and clean or replace wet materials.
Indoors, mold affects air in two ways: particles (spores and tiny fragments) and gases (the musty odor). HEPA handles the particles. Activated carbon helps with odors. Neither product cures a moisture problem. Think of filtration as exposure control while you stop the source.
Most household mold spores fall in the 1–10 micron range. True-HEPA media is rated to capture ≥ 99.97% of 0.3-micron particles in a single pass, so spores and many fragments are well within its wheelhouse. The purifier’s fan draws room air through a sealed filter stack; particles follow the airflow and are trapped in the fibers. Keep air moving through the filter consistently and you’ll steadily lower the spore count where you sit and sleep.
With a correctly sized HEPA purifier running, airborne spore levels drop while the fan is on, then drift upward again if you shut it off or disturb dusty surfaces. Filtration supplements moisture control and cleaning; it does not replace them. Keep indoor relative humidity below 60% (30–50% is ideal), repair leaks, vent baths and kitchens outdoors, and dry or remove materials that stay wet more than 48 hours.
If your worst symptoms are at night, place a true-HEPA purifier in the bedroom and run it 24/7—high for the first hour, then Auto/low. Close the door to maintain a clean zone while you sleep.
If a room smells musty or stays humid, fix moisture first (leaks, ventilation, dehumidifier), then run true-HEPA with an activated-carbon stage to capture spores and reduce odor.
If you want whole-home support, install a MERV 11–13 HVAC return filter in the exact size your system takes. Set the fan to circulate between heating/cooling cycles so the filter sees air more often.
After leak repair or cleanup, keep a HEPA unit running in occupied rooms for a few weeks and change the HVAC filter on schedule. This clears residual airborne spores as materials finish drying.
Room HEPA units clean the air you breathe most, but Filterbuy supports the rest of the home.
Use a Filterbuy MERV 11–13 pleated return filter (standard and custom sizes for a snug, bypass-free fit) and replace about every 90 days. If odors linger, choose the Filterbuy Odor Eliminator (pleated media + activated carbon) to reduce musty gases while the media captures spores and dust.
Filters are USA-made, ship fast and free (often next day), multi-packs can cut per-filter cost by up to 70%, and Auto Delivery saves another 5% so a fresh cartridge arrives right on schedule.
A true-HEPA air purifier does help with mold spore removal in the air, and it helps most when you pair continuous filtration with smart moisture control. Use a Filterbuy MERV 11–13 return filter for the rest of the home.
No. It only captures airborne spores and fragments. Fix moisture, clean hard surfaces, and discard porous materials that stayed wet >48 hours.
A true-HEPA unit (not “HEPA-type”), sized by CADR to your room.
HEPA removes particles; activated carbon reduces musty gases (MVOCs). Use both if odor is an issue.
Use the quick rule: smoke CADR ≈ ⅔ of room square footage (e.g., 300 ft² → ~200 CADR).
All day. Start on high for the first hour, then leave it on Auto/low for steady cleanup.
Give it 6–12 inches of clearance and a clear path for intake/outlet. Avoid corners or behind furniture.
Yes. A Filterbuy MERV 11–13 return filter lowers spores throughout the home each blower cycle; the room purifier gives close-by cleaning.
Most modern blowers can handle MERV 13 if the filter is the correct size and changed on schedule. If rooms feel stuffy, use MERV 11 or ask a tech to adjust fan speed.
HEPA: every 6–12 months. Carbon (if used for odors): every 3–6 months. HVAC return filters: about every 90 days (check monthly; sooner with pets/smoke/renovation).
Aim for 30–50% RH and avoid going above 60%; use exhaust fans or a dehumidifier as needed.
