New Furnace and AC Cost Guide: Replacement Price Breakdown, Bundle Savings When You Install Together, and Efficiency Benefits
November 9, 2026

A new furnace and central air conditioner installed together typically cost $5,000 to $12,500 in 2026, and most standard-efficiency jobs on existing ductwork land near $7,500 to $8,000. At Filterbuy, an air filter manufacturer, we make the filters that protect these systems, and our Filterbuy HVAC Solutions team quotes AC replacements in Florida, so we see both sides of this decision.
TL;DR
A furnace and AC replaced together cost about $5,000 to $12,500 installed, or up to $16,000 with new ductwork. Bundling saves on labor and permits and avoids fitting a new coil to an aging furnace. Replace both when the furnace is past 15 years and the AC is past 10.
Key Takeaways
A furnace alone typically costs $2,800 to $6,900 installed, and a central AC alone $3,900 to $8,000.
Bundle savings come from one labor charge and one permit, not from cheaper equipment. The Filterbuy Two-Quote Test checks for them.
A new AC needs a coil rated for its refrigerant, and that coil usually sits on the furnace.
The federal Section 25C tax credit ended after December 31, 2025, so 2026 incentives come from utilities and states.
How Much Does A New Furnace And AC Cost In 2026?
A new furnace and AC installed together cost $5,000 to $12,500 for most U.S. homes in 2026. Larger homes, new ducts, high-efficiency equipment, and gas venting push the price higher.
Filterbuy planning ranges, built by comparing 2025 and 2026 national installed-cost guides. A local quote is the only firm price.
At roughly $3 to $6 per square foot, a 2,000-square-foot home runs about $6,000 to $12,000. For furnace-only line items, see our furnace installation cost breakdown.
Do You Save Money By Installing A Furnace And AC Together?
Yes, installing a furnace and AC together usually costs less than replacing them in separate years. When Filterbuy broke a typical replacement into line items, equipment cost barely changed either way. The savings come from paying for one labor charge and one permit instead of two.
Labor and permit ranges from national installed-cost guides. Local permit fees vary.
Run The Filterbuy Two-Quote Test Before You Sign
Ask each contractor for the bundled price and for each system priced alone. If the bundle is not cheaper than the two prices added together, the shared labor savings are not being passed along.
Example: an AC quoted alone at $5,500 and a furnace quoted alone at $4,000 add up to $9,500. Because one labor charge often runs $1,000 to $3,000, a fair bundle would usually land between $6,500 and $8,500.
Why The Indoor Coil Often Decides Whether To Replace Both
A central AC has two halves: the outdoor condenser and the indoor evaporator coil, which usually sits on top of or beside the furnace. New air conditioners built for lower-GWP refrigerants such as R-454B or R-32 need a coil rated for that refrigerant, so a new AC almost always means a new coil mounted on the furnace. The NAHB guidance on new refrigerants notes that old and new equipment is not compatible unless the manufacturer says so.
On a furnace near the end of its life, that new coil may need to be refit when the furnace fails, so you pay for coil work twice. The furnace blower also moves air across the coil, and an old blower can keep a new condenser from reaching its rated SEER2. Most homeowners never see this part of the quote, which is why the Filterbuy team puts the coil question first.
Three Questions To Ask About The Coil
Is a new coil included, and is it rated for the new refrigerant?
Will it fit my current furnace or air handler cabinet?
Can you show the AHRI matched-system certificate?
Should You Replace Your Furnace And AC At The Same Time?
Replace both when both are near the end of their lives, or when one has failed and the other is close behind. ENERGY STAR suggests considering replacement once an air conditioner passes 10 years or a furnace passes 15 years. If one system is fairly new, replace only the failed unit. The Filterbuy decision guide:
Furnace 15+ years and AC 10+ years: replace both together.
AC failed, furnace under 10 years and healthy: replace the AC and its coil.
Furnace failed, AC under 7 years: replace the furnace and confirm the coil fits.
Furnace failed, AC 8 years or older: price both options.
Moving within 2 to 3 years: replace only what failed.
What Changes For Florida Homes
In Florida, 77% of homes ran on electricity alone in 2020, according to EIA data, so most systems pair the AC with an air handler and electric heat strips, or use a heat pump. The bundle logic still applies, because the coil sits in or on the air handler.
What Efficiency Benefits Come With A New Furnace And AC?
A new furnace and AC lower heating and cooling costs. Furnace efficiency is measured by AFUE, the percentage of fuel that becomes heat, and AC efficiency by SEER2. Higher ratings cost more upfront and less to run.
Under the federal efficiency standards in 10 CFR 430.32, most new gas furnaces must reach at least 80% AFUE, and new central air conditioners must meet 13.4 SEER2 in northern states and 14.3 SEER2 for most split systems in southern states. According to ENERGY STAR, certified gas furnaces are up to 18% more efficient than baseline models in northern states, worth about $160 a year.
Filterbuy's rule of thumb: spend efficiency dollars where your climate spends energy. Cold northern homes usually get more return from a 95% AFUE furnace, while hot southern homes get more from a higher SEER2 air conditioner.
Rules, Tax Credits, And Rebates To Check Before You Sign
Tax credit: The Section 25C credit is not allowed for property placed in service after December 31, 2025, per IRS guidance on the expired 25C credit.
Refrigerant: An EPA final rule on refrigerant transitions removed the installation deadline for residential AC systems whose components were made or imported before January 1, 2025.
Furnace standard: A DOE rule would require 95% AFUE for most new gas furnaces made from December 18, 2028. In June 2026 the Supreme Court sent the case back for review, per the Supreme Court docket for the furnace standard case, so its timing is unsettled.
Rebates: Ask your utility about equipment rebates, and check your state on the DOE Home Energy Rebates page.
What Should A Furnace And AC Replacement Quote Include?
A complete, itemized quote lets you compare contractors fairly.
A load calculation using the ACCA Manual J load calculation method.
Furnace, coil, and condenser model numbers with an AHRI matched-system certificate.
Refrigerant type, and whether a new coil and line set are included.
Ductwork inspection results and any duct repair priced separately.
Permit and removal costs, plus written parts and labor warranty terms.
The bundled price and each system priced alone.
How To Protect A New Furnace And AC From Day One
Protect a new furnace and AC by confirming the filter size and changing the filter on schedule. A clean pleated filter keeps dust off the new blower and coil.
As a filter manufacturer, Filterbuy's first advice for any new system is to measure the new filter slot before you reorder, because new equipment can move the slot or change its size. The Filterbuy HVAC filter size guide walks you through it. A Filterbuy MERV 8 filter is a solid baseline, and our MERV 11 air filters capture more fine particles such as pollen and pet dander. Check your HVAC manual for the MERV rating your system supports, and see our MERV 8 vs MERV 11 comparison. Then follow our guide on how often to change your furnace filter.
Expert Insight From The Filterbuy Team
David Clark, Licensed HVAC Technician: "The question I hear most is whether to replace both. When the furnace is past 15 years and the AC is past 10, I price both, because putting a new coil on an old furnace usually means paying for that work twice."
Michelle Wan, Brand Manager, Filterbuy: "Most cost guides stop at the total. We wanted homeowners to see what they pay once versus twice, because that is where the savings are."
Supporting Statistics
52% of home energy goes to heating and cooling
U.S. Energy Information Administration survey data, 2020.
Your furnace and AC are the biggest lever on your energy bill.
Source: Use of Energy in Homes
10 and 15 years are the replacement checkpoints
ENERGY STAR says to consider replacing an AC after 10 years and a furnace after 15.
Correctly installed high-efficiency units can save up to 20% on heating and cooling.
Source: When Is It Time to Replace?
Poor installation can add about 30% to energy use
National Institute of Standards and Technology lab tests found improper installation can raise heating and cooling energy use by about 30%.
Leaky ducts were the biggest fault.
Ask for a load calculation and duct check on every quote.
Source: Underperforming? Energy Efficiency of HVAC Equipment Suffers Due to Poor Installation
Frequently Asked Questions
How Much Does A New Furnace And AC Cost?
A new furnace and central AC typically cost $5,000 to $12,500 installed together in 2026. New ductwork can raise the total to about $16,000.
Is It Cheaper To Replace The Furnace And AC At The Same Time?
Usually, yes. You pay one labor charge and one permit instead of two, and the Two-Quote Test confirms it.
Can I Replace My AC And Keep My Furnace?
Yes, if the furnace is healthy and its blower suits the new AC. The new coil also has to fit the furnace cabinet.
Should I Get A Heat Pump Instead Of A Furnace And AC?
A heat pump heats and cools with one outdoor unit, so it can replace both. It suits mild and hot climates best.
Will My New HVAC System Need A Different Filter Size?
It might. New furnaces and air handlers can use a different filter size or slot, so measure before ordering. Filterbuy makes filters in hundreds of sizes, including custom sizes.
Get An Honest Furnace And AC Quote From Filterbuy HVAC Solutions
Filterbuy HVAC Solutions gives free quotes to homeowners in our Florida service area. Ask for yours itemized, and run the Two-Quote Test on us too. Book your free HVAC quote online, call (833) 418-3331, or ask about HVAC financing options. Once your new system is running, Filterbuy ships pleated air filters with fast and free 2-day delivery to most US states.
Glossary
AFUE: Annual Fuel Utilization Efficiency, the percentage of a furnace's fuel that becomes usable heat.
SEER2: The federal rating for central air conditioner cooling efficiency, in use since 2023.
A2L Refrigerant: Lower-GWP refrigerants such as R-454B and R-32, used in most new AC systems.
GWP: Global Warming Potential, a measure of how much heat a refrigerant traps.
Manual J: The ACCA method for calculating a home's heating and cooling load.
AHRI Matched System: A furnace, coil, and condenser combination rated together by the Air-Conditioning, Heating, and Refrigeration Institute.
MERV: Minimum Efficiency Reporting Value, a 1 to 16 scale rating how well an air filter captures airborne particles.
Filterbuy: An air filter manufacturer that makes pleated MERV 8, MERV 11, and MERV 13 HVAC filters.
Filterbuy HVAC Solutions: Filterbuy's HVAC installation and service brand for Florida homeowners.