Shop by
Electric furnaces are common in mobile homes and manufactured homes, especially in areas where natural gas is not available. The best option depends on what you have now, whether your home uses ducts, and what equipment is approved for your home type.
Before you choose a new unit, identify what you already have. This keeps the project focused and helps you avoid equipment that does not fit the duct layout or electrical setup.
Most homes fall into one of these categories:
Once you know which one applies, the replacement options become clearer.
The best “option” is usually the one that matches how your home is already built.
Many manufactured homes use electric furnaces that are listed for manufactured housing applications. These are designed to fit common closet installs and duct connection layouts found in manufactured housing.
This option is usually the most straightforward when:
What to confirm with your installer:
If you already have an electric furnace, this is often the cleanest replacement path.
An air handler is common in systems that also provide cooling, and it is very common in heat pump setups. Electric heat strips can provide supplemental heat when outdoor temperatures drop or when the heat pump needs support.
This option makes sense when:
What to confirm with your installer:
This option is common in modern setups because it supports heating and cooling in one ducted system.
Some homeowners consider a heat pump when they want both heating and cooling and want lower heating costs in milder climates. A heat pump still uses an air handler and ducts, and it typically uses electric backup heat for very cold conditions or defrost cycles.
This option is usually a good fit when:
What to confirm with your installer:
A heat pump system can be a practical option, but it needs correct sizing, correct controls, and proper airflow.
If you plan to stay with an electric furnace, you may still have options that improve comfort or operation. The exact features depend on the equipment type and what your home can support.
Common upgrades include:
Do not assume upgrades are always beneficial. The goal is compatibility and reliable operation, not extra features that do not match the home.
If you want an upgrade, confirm it fits the home and does not create airflow or electrical issues.
Even when an option sounds good, a few practical limits decide what will work.
The most common limits are:
These limits are why installers often recommend a like for like replacement when possible
If your home uses ducts for heating, cooling, or both, the system depends on steady airflow. The filter sits on the return side and helps keep dust off key components like the blower and indoor coil.
Before assuming an equipment problem, check the filter. If it is visibly dirty, replace it and recheck airflow.
Once you confirm the correct filter size, Filterbuy can be a practical option for replacements because it carries both standard and custom sizes and offers Auto Delivery for scheduled replacements.
Filter fit and consistent replacement support airflow, regardless of which electric heating option you choose.
Electric furnaces and electric ducted heating systems are common in mobile homes and manufactured homes. The best option depends on what you have now, what the home can support electrically, and how the duct system is set up. If you match the system type correctly and keep airflow steady, the system is more likely to run consistently.
Yes. Many mobile homes and manufactured homes use electric furnaces, especially where natural gas is not available.
An electric furnace is a furnace style cabinet that heats air with electric elements. An air handler is part of a ducted system and can use electric heat strips for supplemental or backup heat.
No. A heat pump is an electric heating and cooling system that moves heat rather than producing it with electric elements most of the time. Many heat pump systems still include electric heat strips for backup.
Many do. If the home uses ductwork and a central blower, there is usually a filter on the return side.
Common locations include a return grille inside the home or a filter slot at the furnace or air handler cabinet. The location depends on how the system was installed.
Sometimes, but it depends on airflow and the system design. Match the correct size and thickness first, then confirm with a technician before increasing filtration.
Check the existing unit label and the installation setup, then have an HVAC professional confirm the correct replacement type and any manufactured housing requirements before buying equipment.
